Utilization of Ceramics Sanitaryware Waste (CSW) as an Admixture Material of Cooling Paint Products to Apply in Eco-Friendly Sustainability Infrastructure

Hendra Kustiawan; Suwanna Boontanon; Sayam Aroonsrimorakot; Narin Boontanon

doi:10.53889/gmpics.v3.417

Utilization of Ceramics Sanitaryware Waste (CSW) as an Admixture Material of Cooling Paint Products to Apply in Eco-Friendly Sustainability Infrastructure

Hendra Kustiawan, Suwanna Boontanon, Sayam Aroonsrimorakot, Narin Boontanon

Abstract

Sanitaryware is a specific type of ceramic product that holds significant importance in the worldwide ceramics industry. On a global scale, the sanitaryware industry's annual production capacity gradually increased from 352.76 to 391.75 million PCs per year in 2019 to 2021. However, around 28.22 to 30.55 million PCs of these become rejected products, wherein it has including non-biodegradable waste. This study aims to examine the potential of ceramics sanitaryware waste as an admixture material in cooling paint products to mitigate the global warming impact and promote environmental sustainability. The techniques employed involve the combination of ceramics sanitaryware waste in diverse compositions embedded into the acrylic paint, subsequent applications were coated into substrates. Furthermore, measurements were carried out encompassing chemical, physical, and performance analysis. The findings of X-ray fluorescence analysis indicate that ceramics sanitaryware waste is predominantly composed of SiO₂ and Al₂O₃ over 90% with Mullite and Quartz as the major compounds in X-ray diffraction. The density and acidity resulted in > 1.1 g/cm³ and >7. The solar reflectance achieved an average thermal performance of 91.12%, while the thermal emittance achieved a thermal performance of 98.50%. Heat resistance has resulted in a maximum reduce temperature of -8.5⁰C indoors and -10.5⁰C outdoors. The thermal images have shown that ceramic sanitaryware waste can reflect sunlight average of > 9⁰C compared with ambient. Moreover, in terms of efficiency, cooling paint made from ceramics sanitaryware waste could be estimated to yield energy savings between 25.5% to 31.5% and reduce CO₂ emissions around 0.0384 KgCO₂eq /⁰C. The study revealed that it can be demonstrated that Ceramics Sanitaryware Waste has significant potential as admixture materials in cooling paint as an alternative solution to combat the heat phenomenon in urban areas and lessen the impact of climate change and global warming.

Keywords

Sanitaryware; Ceramics Sanitaryware Waste; Cooling Paint; Climate Change

Full Text:

PDF

References

Xiao P. “Frontiers in ceramics” grand challenges. Front Ceram 2023;1:1–2. https://doi.org/10.3389/fceic.2023.1137377.

Furszyfer Del Rio DD, Sovacool BK, Foley AM, Griffiths S, Bazilian M, Kim J, et al. Decarbonizing the ceramics industry: A systematic and critical review of policy options, developments and sociotechnical systems. Renew Sustain Energy Rev 2022;157:112081. https://doi.org/10.1016/j.rser.2022.112081.

Fantozzi G. Welcome to ceramics: A new open access scientific journal on ceramics science and engineering. Ceramics 2018;1:1–2. https://doi.org/10.3390/ceramics1010001.

Mukherjee S. Traditional and Modern Uses of Ceramics, Glass and Refractories. Sci Clays 2013:123–50. https://doi.org/10.1007/978-94-007-6683-9_8.

Grossin D, Monton A, Navarrete-segado P, Ozmen E, Urruth G, Maury F, et al. OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible This is a Publisher ’ s version published in : http://oatao.univ-toulouse.fr/27601 Official URL : https://doi.org/1. Open Ceram 2021.

Kunduraci N, Tarhan B, Cahide S. Evaluation of Production Costs Based on Reduction of Pyroplastic Deformation in Ceramic Sanitaryware Products Seramik Sağlık Gereçleri Ürünlerinde Piroplastik Deformasyonun Azaltılmasına Bağlı Olarak Geliştirilen Kompozisyonların Üretim Maliyeti Açısından 2019.

Tarhan B, Tarhan M. Utilization of perlite as an alternative raw material in the production of ceramic sanitaryware. J Therm Anal Calorim 2022;147:3509–18. https://doi.org/10.1007/s10973-021-10784-5.

Silvestry L, Forcina A, Silvestry C, Loppolo G. Life Cycle Assessment of electricity production from refuse derived fuel: A case study in Italy. Sci Total Environ 2020;738. https://doi.org/10.1016/j.scitotenv.2020.139719.

BOYRAZ T, ÖNEN U, TAPİK Ş. Investigation Of The Effect Of Vermiculite (Yıldızeli/Sivas) Addition On The Properties Of Sanitaryware Ceramic. Osmaniye Korkut Ata Üniversitesi Fen Bilim Enstitüsü Derg 2022;5:632–42. https://doi.org/10.47495/okufbed.1050392.

Luca Baraldi. World Production and consumption of sanitaryware. vol. 149. November/D. 2022.

Luca Baraldi. World production and consumption of ceramic tiles. Ceram World Rev 148 2022;148:41–50.

Medina C, Sánchez De Rojas MI, Frías M. Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes. Cem Concr Compos 2012;34:48–54. https://doi.org/10.1016/j.cemconcomp.2011.08.015.

Sangwan KS, Choudhary K, Agarwal S. Development of an electric-load intelligence system for component level disaggregation to improve energy efficiency of machine tools. 2020. https://doi.org/10.1007/978-3-030-44248-4_12.

Meena RV, Jain JK, Chouhan HS, Beniwal AS. Use of waste ceramics to produce sustainable concrete: A review. Clean Mater 2022;4. https://doi.org/10.1016/j.clema.2022.100085.

Roushdy MH. Recycling of the mixture resulted from sanitary ware waste, roller kiln waste and ceramic tiles sludge waste in the manufacturing of ceramic floor tiles. Int J Innov Technol Explor Eng 2019;8:379–86. https://doi.org/10.35940/ijitee.K1360.0981119.

Sawadogo M, Seynou M, Zerbo L, Sorgho B, Laure Lecomte-Nana G, Blanchart P, et al. Formulation of Clay Refractory Bricks: Influence of the Nature of Chamotte and the Alumina Content in the Clay. Adv Mater 2020;9:59. https://doi.org/10.11648/j.am.20200904.11.

Bayer Öztürk Z, Atabey İİ. Mechanical and microstructural characteristics of geopolymer mortars at high temperatures produced with ceramic sanitaryware waste. Ceram Int 2022;48:12932–44. https://doi.org/10.1016/j.ceramint.2022.01.166.

Mostari MS, Haque MJ. Recycling of Post Sintered Sanitaryware Waste in Its Formulation. Int J Tech Res Sci 2020;5:27–34. https://doi.org/10.30780/ijtrs.v05.i08.004.

Reig L, Soriano L, Borrachero MV, Monzó JM, Payá J. Potential use of ceramic sanitary ware waste as pozzolanic material. Bol La Soc Esp Ceram y Vidr 2022;61:611–21. https://doi.org/10.1016/j.bsecv.2021.05.006.

Zhang H, Yang Y, Huang J, Fan D. Radiative cooling gray paint with high solar reflectance for thermal management of electronic equipment. Sol Energy 2022;241:460–6. https://doi.org/10.1016/j.solener.2022.06.019.

Tang H, Li S, Zhang Y, Na Y, Sun C, Zhao D, et al. Radiative cooling performance and life-cycle assessment of a scalable MgO paint for building applications. J Clean Prod 2022;380:135035. https://doi.org/10.1016/j.jclepro.2022.135035.

Allaoui D, Nadi M, Hattani F, Majdoubi H, Haddaji Y, Mansouri S, et al. Eco-friendly geopolymer concrete based on metakaolin and ceramics sanitaryware wastes. Ceram Int 2022;48:34793–802. https://doi.org/10.1016/j.ceramint.2022.08.068.

Atabey İİ. Influence of Ca and Al source on elevated temperature behavior of waste ceramic sanitaryware-based alkali-activated mortars. J Aust Ceram Soc 2022;58:949–62. https://doi.org/10.1007/s41779-022-00750-1.

Kinoshita S, Yoshida A. Investigating performance prediction and optimization of spectral solar reflectance of cool painted layers. Energy Build 2016;114:214–20. https://doi.org/10.1016/j.enbuild.2015.06.072.

Qin M, Xiong F, Aftab W, Shi J, Han H, Zou R. Phase-change materials reinforced intelligent paint for efficient daytime radiative cooling. IScience 2022;25. https://doi.org/10.1016/j.isci.2022.104584.

Halicka A, Ogrodnik P, Zegardlo B. Using ceramic sanitary ware waste as concrete aggregate. Constr Build Mater 2013;48:295–305. https://doi.org/10.1016/j.conbuildmat.2013.06.063.

Medinna C, Sanchez de Rojas M., Frias M, Juan A. We are IntechOpen , the world ’ s leading publisher of Open Access books Built by scientists , for scientists TOP 1 %. Intech 2016;11:13.

Tutkun B, Beglarigale A, Yazici H. Alkali-silica reaction of sanitary ware ceramic wastes utilized as aggregate in ordinary and high-performance mortars. Constr Build Mater 2022;319. https://doi.org/10.1016/j.conbuildmat.2021.126076.

Li LG, Zhuo ZY, Zhu J, Chen JJ, Kwan AKH. Reutilizing ceramic polishing waste as powder filler in mortar to reduce cement content by 33% and increase strength by 85%. Powder Technol 2019;355:119–26. https://doi.org/10.1016/j.powtec.2019.07.043.

Roushdy MH. Sanitary Ware Waste as a Source for a Valuable Biodiesel Catalyst. J Chem 2022;2022. https://doi.org/10.1155/2022/1232110.

ISO. ISO 1514:2016 paint and varnish standard panel for testing. 2016.

ISO 13320. Particle size analysis — Laser diffraction methods. Int Organ Stand 2009;10406-1:20:9.

Dodds J. Techniques to analyse particle size of food powders. Handb Food Powders Process Prop 2013:309–38. https://doi.org/10.1533/9780857098672.2.309.

Zhang K, Tran I, Tan S. Characterization of Particle-Size-Based Homogeneity and Mycotoxin Distribution Using Laser Diffraction Particle Size Analysis. Toxins (Basel) 2023;15. https://doi.org/10.3390/toxins15070450.

Horiba. a Guidebook To Particle Size Analysis. Horiba 2019:1–17.

Ali A, Chiang YW, Santos RM. X-Ray Diffraction Techniques for Mineral Characterization: A Review for Engineers of the Fundamentals, Applications, and Research Directions. Minerals 2022;12. https://doi.org/10.3390/min12020205.

Singh Y. X-Ray Diffraction in Mineralogical Research. J ISAS 2023;1:1–11. https://doi.org/10.59143/isas.jisas.1.4.wcjb9374.

Ermrich M, Opper D. X-ray Powder Diffraction for the Analyst. 2011.

Bunaciu AA, Udriştioiu E gabriela, Aboul-Enein HY. X-Ray Diffraction: Instrumentation and Applications. Crit Rev Anal Chem 2015;45:289–99. https://doi.org/10.1080/10408347.2014.949616.

Silva TH, Castro ACM, Valente Neto FC, Soares MMNS, De Resende DS, Bezerra ACS. Recycling ceramic waste as a raw material in sanitary ware production. Ceramica 2019;65:426–31. https://doi.org/10.1590/0366-69132019653752687.

Scapin MA, Tessari-Zampieri MC, Guilhen S, Cotrim M. X-ray fluorescence spectrometry: An alternative technique for analysis of waste. Brazilian J Radiat Sci 2023;11:01–8. https://doi.org/10.15392/2319-0612.2023.2144.

Brouwer P. Theory of XRF. PANalytical B.V.; 2010.

Gerodimos T, Asvestas A, Mastrotheodoros GP, Chantas G, Liougos I, Likas A, et al. Scanning X-ray Fluorescence Data Analysis for the Identification of Byzantine Icons’ Materials, Techniques, and State of Preservation: A Case Study. J Imaging 2022;8. https://doi.org/10.3390/jimaging8050147.

Tarhan B, Tarhan M, Aydin T. Reusing sanitaryware waste products in glazed porcelain tile production. Ceram Int 2017;43:3107–12. https://doi.org/10.1016/j.ceramint.2016.11.123.

Zhang X, Zhou S, Leonik FM, Wang L, Kuroda DG. Quantum mechanical effects in acid-base chemistry. Chem Sci 2022;13:6998–7006. https://doi.org/10.1039/d2sc01784a.

Harsch H-DB; N. BROENSTED ACIDS AND BASES 2014 ( HD Barke 2014).pdf 2014:10.

Tshepelevitsh S, Kütt A, Lõkov M, Kaljurand I, Saame J, Heering A, et al. On the Basicity of Organic Bases in Different Media. European J Org Chem 2019;2019:6735–48. https://doi.org/10.1002/ejoc.201900956.

World Health Organization. Silicon Dioxide , Amorphous Chemical names 2017:0–3.

ASTM D1475. Standard Test Method For Density of Liquid Coatings, Inks and Related Products, ASTM International, West Conshohocken, PA, 2020, URL www.astm.org 2020;i:1–2. https://doi.org/10.1520/D1475-13R20.2.

ISO 2811: 2016. Paint and Varnish Determination of density. 2016.

Mehdipour‐Ataei S, Tabatabaei‐Yazdi Z. Heat Resistant Polymers. 2015. https://doi.org/10.1002/0471440264.pst636.

Rohm CO, LTD. Application Note Thermal Design (Basic) Basics of Thermal Resistance and Heat Dissipation 2021:1–6.

Ma B, Cheng Y, Hu P, Fang D, Wang J. Passive Daytime Radiative Cooling of Silica Aerogels. Nanomaterials 2023;13. https://doi.org/10.3390/nano13030467.

Peoples J, Li X, Lv Y, Qiu J, Huang Z, Ruan X. A strategy of hierarchical particle sizes in nanoparticle composite for enhancing solar reflection. Int J Heat Mass Transf 2019;131:487–94. https://doi.org/10.1016/j.ijheatmasstransfer.2018.11.059.

Kraus SF. Measuring the Earth’s albedo with simple instruments. Eur J Phys 2021;42. https://doi.org/10.1088/1361-6404/abe8e4.

Gray S, Cotta T, Blue R. Solar Reflectance, Thermal Emittance and Solar Reflectance Index (SRI) 2009;100:95354.

ISO. ISO 9050 Glass in building — Determination of transmittance, ultraviolet transmittance transmittance, total solar energy light transmittance, solar direct and related glazing factors. ISO 2003;2.

Rong X, Jiao L, Kong X, Yuan G. Research on low-brightness and high-reflective coatings suitable for buildings in tropical areas. Coatings 2020;10. https://doi.org/10.3390/coatings10090829.

Casini M. Advanced building skin. Smart Build 2016:219–45. https://doi.org/10.1016/b978-0-08-100635-1.00006-x.

Ravenel N, Burks J. Technical Tidbits. MATERION 2018;1:0–1.

Pisello AL. High-albedo roof coatings for reducing building cooling needs. Elsevier Ltd.; 2015. https://doi.org/10.1016/B978-1-78242-380-5.00009-1.

Shakir HMF, Ali A, Zubair U, Zhao T, Rehan ZA, Shahid I. Fabrication of low emissivity paint for thermal/NIR radiation insulation for domestic applications. Energy Reports 2022;8:7814–24. https://doi.org/10.1016/j.egyr.2022.05.287.

Kalman L. Development of a novel dental thermal imaging application. Med Res Innov 2022;6:1–8. https://doi.org/10.15761/mri.1000184.

A. Skouroliakou, I. Kalatzis NK. Infrared thermography quantitative image processing 2017.

Zhao X, Luo Y, He J. Analysis of the Thermal Environment in Pedestrian Space Using 3D Thermal Imaging 2020.

Yang X, Geng J, Tan X, Liu M, Yao S, Tu Y, et al. A flexible PDMS@ZrO2 film for highly efficient passive radiative cooling. Inorg Chem Commun 2023;151:110586. https://doi.org/10.1016/j.inoche.2023.110586.

S Kam IM. 25.5 Deg C and Human Comfort 2005.

Lawrence T. Turn up the thermostat: lower energy costs, no complaints. UGA Res 2020. https://research.uga.edu/news/turn-up-the-thermostat-lower-energy-costs-no-complaints/ (accessed February 29, 2024).

Guo S, Yang H, Li Y, Zhang Y, Long E. Energy saving effect and mechanism of cooling setting temperature increased by 1 °C for residential buildings in different cities. Energy Build 2019;202:109335. https://doi.org/10.1016/j.enbuild.2019.109335.

Poolsawat K, Tachajapong W, Prasitwattanaseree S, Wongsapai W. Electricity consumption characteristics in Thailand residential sector and its saving potential. Energy Reports 2020;6:337–43. https://doi.org/10.1016/j.egyr.2019.11.085.

Himacharoen J. MEA reveals air conditioner test results The hotter the weather The more power is consumed 2021. https://www.mea.or.th/public-relations/corporate-news-activities/announcement/TyK32m6qm (accessed February 29, 2024).

DOI: https://doi.org/10.53889/gmpics.v3.417